Solar Charge Controller

SolarAmp BG/ SolarAmp B/ SolarAmp B Auto Night Detection/
SolarAmp B For Lithium Battery/ SolarAmp mini/ DPLS-10

SolarAmp BG



  • High Weather Resistance
  • Slim and compact design
  • High Toughness
  • Easy to Install and Use
  • Multicolor LED Indicator
  • Low Self-Consumption
  • Cutting-edge Technology
  • Adequate Protection Circuit
  • Over Discharged Battery Recovery
  • Made in Japan

High Weather Resistance

SolarAmp BG is fully encapsulated in a special plastic case and meets waterproof and dustproof IP68. The operating temperature range is -40°C to +70°C, which is for use in harsh environments.

Slim and compact design

The size is as small as a business card. Thanks to no terminals, the thickness is only 8.5 mm.

High Toughness

The housing by impact resistant special plastic and fully encapsulated structure prevent mechanical failure from in breaking of foreign body. Outdoor rated, connecting wires prevent terminals from rusting.

Easy to Install and Use

No installation settings are required. Automatically start after connecting the battery, photovoltaic module and DC load.

Multicolor LED Indicator

Green, yellow, and red, three-colors LED indicates charging status, warning or error.

Low Self-Consumption

The low self-consumption current brings long-term stabilization and increases system performance.

Cutting-edge Technology

SolarAmp BG utilizes the most advanced materials and components in Japan; achieving excellent durability and reliability.

Adequate Protection Circuit

  • High / Low Voltage Protection
  • Over Discharge Protection
  • High Temperature Protection
  • Reverse Polarity Protection
  • Over Load Protection
  • Short Circuit Protection
  • Surge Protection

Over Discharged Battery Recovery

SolarAmp BG has the battery recovery function. This is convenient for the system in areas where systems are difficult to maintain on a regular basis.

Made in Japan

Both software and hardware are designed and manufactured in Japan.

Model No.
SA-BGA10
System Voltage
12V
Max. Input Voltage
25Vdc
Min. Input Battery Voltage
6Vdc
Max. PV Input Current
10A
Max. Load Current
10A
Self-consumption Current
2mA(Typical)
Charging Algorithm
3-stage (Bulk, Absorption, Float)
Bulk Charging Voltage
14.4Vdc
Float Charging Voltage
13.7Vdc
High Voltage Protection
18Vdc
Over Discharge Protection  Warning
11.8Vdc
 LVD
11.5Vdc
 LVR
12.5Vdc
High Temperature Protection  Warning
60℃
 Error
80℃
 Recovery
60℃
Battery Type
Lead Acid Battery
Wire Size
#12AWG
Grounding
Positive Ground
Temperature Coefficient
-30mV/℃
Operation/Storage Temperature
-40 to +70℃
Humidity
100%RH
Dimensions(W×H×D)
87×51×8.5(mm)
Weight
65g
◆The specifications are subject to change without notice.

 

Products

Support